Genomic characterization of Mycoplasma edwardii isolated from a dog bite induced cat wound reveals multiple horizontal gene transfer events and loss of the CRISPR/Cas system.

A domestic short hair cat (Felis catus) suffering from a purulent wound infection resulting from a dog bite was sampled for bacterial culture and isolation as the wound had been unresponsive to prolonged antimicrobial treatment. A mycoplasma was isolated from the wound. Whole genome sequencing of the isolate was performed using short-read Illumina and long-read Oxford Nanopore chemistry, and the organism was identified as Mycoplasma edwardii. Comparison of the genome sequence of the isolate to a reference M. edwardii genome sequence (canid isolate) identified the loss of several key bacterial factors involved in genome editing, as well the insertion of several novel ORFs most closely related to those found in other canine mycoplasmas, specifically Mycoplasma canis, M. cynos, M. molare and M. maculosa. This is only the second known report of disease caused by M. edwardii in a non-canid species, and the first report of it infecting and causing clinical disease in a cat.

Biomechanical Comparison of a 3-Loop Pulley and a 4-Loop Pulley Suture for Tenorrhaphy in the Canine Gastrocnemius Tendon.

OBJECTIVE: The aim of this study was to compare a 3-loop pulley (3LP) suture pattern with a 4-loop pulley (4LP) suture pattern for the tenorrhaphy of the canine gastrocnemius tendon STUDY DESIGN: Randomized, cadaveric, biomechanical study of 30 canine gastrocnemius tendons. Tendons were transected and repaired with either 3LP or 4LP suture pattern with 2-0 polypropylene. A tensile load was applied at 25 mm/min until construct failure. The load required to form a 1 mm gap, 3 mm gap and maximum load at failure was recorded and compared between groups. RESULTS: The estimated mean load to form a 1 mm gap for the 3LP and 4LP was 28.4 N (95% confidence interval [CI]: 24.0-32.6N) and 45.5 N (95% CI: 40.7-50.1N) respectively. The 4LP mean load to form a 1 mm gap was 17.1 N (95% CI: 11.7-22.5N) greater than the 3LP. The estimated mean load to form a 3mm gap for the 3LP and 4LP was 39.7 N (95% CI: 34.1-45.4N) and 55.0 N (95% CI: 49.3-60.9N) respectively. The mean load to form a 3mm gap was 15.3 N (95% CI: 8.5-21.9N) greater in the 4LP than the 3LP. The estimated mean load for failure in the 3LP and 4LP was 41.2 N (95% CI: 35.6-46.9 N) and 54.3 N (95% CI: 48.7-60.3 N) respectively. CONCLUSION: A 4LP pattern was biomechanically superior to a 3LP pattern, as demonstrated by a greater load required to form both a 1 and 3 mm gap and a greater load for failure CLINICAL SIGNIFICANCE: A 4LP suture pattern better resists gap formation and requires greater load prior to construct failure compared with a 3LP, in this canine gastrocnemius model.

Effects of Femorotibial and Tibiotarsal Joint Ranges of Motion on the Gastrocnemius Muscle-Tendon Working Length in the Canine Cadaveric Limb.

OBJECTIVE: This study aimed to describe changes in the length of the gastrocnemius muscle-tendon unit between the medial fabella and the calcaneus (MF-C) at different femorotibial joint (FTJ) and tibiotarsal joint (TTJ) angle combinations in the canine limb. STUDY DESIGN: This is an ex vivo kinematic study. ANIMALS: Canine cadaveric pelvic limbs (n = 11). PROCEDURES: One cadaveric pelvic limb was dissected to identify the anatomical origin and insertion of the gastrocnemius muscle-tendon unit for the radiographic landmark determination. The radiographic landmarks of the FTJ and TTJ were identified by lateral view radiographs. A series of lateral radiographs were evaluated to measure the linear MF-C at all combinations of the FTJ and TTJ angles. A mathematical model was defined for MF-C. RESULTS: The MF-C is associated with the FTJ and TTJ by a linear trigonometric relationship. Higher rate of increase in the MF-C was observed when the FTJ was > 135 degrees and the TTJ was < 125 degrees, compared with when the FTJ was <135 degrees and the TTJ was >125 degrees in all groups. CONCLUSIONS: Thirty degrees of free range of motion of the TTJ between 140 and 170 degrees did not elongate MF-C in this cadaveric limb study. CLINICAL RELEVANCE: Some degrees of free range of motion may be possible in the TTJ during tendon healing based on our cadaveric study without causing excessive change in the MF-C, although this concept should not be applied until isometric contractions of muscles are clearly understood. The relationship between the MF-C and tension at tenorrhaphy should be evaluated.

Longitudinal and Vertical Variations of Dissolved Labile Phosphoric Monoesters and Diesters in the Subtropical North Pacific.

The labile fraction of dissolved organic phosphorus (DOP) - predominantly consisting of phosphoric esters - is an important microbial P source in the subtropical oligotrophic ocean. However, unlike phosphate, knowledge for labile DOP is still limited due to the scarcity of broad and intensive observations. In this study, we examined the concentrations and size-fractionated hydrolysis rates of labile phosphoric monoesters and diesters along a >10,000 km longitudinal transect in the North Pacific (23°N; upper 200-m layer). Depth-integrated monoesters decreased westward with a maximum difference of fivefold. Vertical profiles of monoesters in the eastern and western basins showed decreasing and increasing trends with depth, respectively. The monoester-depleted shallow layer of the western basin was associated with phosphate depletion and monoesterase activity was predominant in the large size fraction (>0.8 µm), suggesting that monoesters are significant P sources particularly for large microbes. In contrast, diester concentrations were generally lower than monoester concentrations and showed no obvious horizontal or vertical variation in the study area. Despite the unclear distribution pattern of diesters, diesterase activity in the particulate fraction (>0.2 µm) increased in the phosphate-depleted shallow layer of the western basin, suggesting that the targeted diesters in the assay were also important microbial P sources. Diesterase activities in the dissolved fraction (<0.2 µm) were not correlated with ambient phosphate concentrations; however, cell-free diesterase likely played a key role in P cycling, as dissolved diesterase activities were substantially higher than those in the particulate fraction. The horizontal and vertical variability of labile monoesters in the subtropical North Pacific were therefore predominantly regulated by P stress in particularly large microbes, whereas the distributions of labile diesters and diesterase activities were generally independent of microbial P stress, indicating a more complex regulation of diesters to that of monoesters.

Biomechanical evaluation of 6 transarticular tibiotarsal immobilization methods in canine cadaveric limbs.

OBJECTIVE: To determine the effects of 6 types of transarticular immobilization techniques on tibiotarsal joint angles during stimulated weight bearing. STUDY DESIGN: Canine ex vivo biomechanical study. SAMPLE POPULATION: Canine cadaveric pelvic limbs (n = 15). METHODS: A validation study was conducted to determine tibiotarsal flexion before and after transection of the superficial digital flexor tendon in 5 canine cadaveric limbs without tibiotarsal joint immobilization. Six transarticular tibiotarsal immobilization techniques were tested sequentially in 10 canine cadaveric pelvic limbs. The tibiotarsal joint angles were measured from lateral projection radiographs before and during axial loading of 200 N. Mixed linear models were applied to determine the effects of the immobilization techniques on change in tibiotarsal joint angle under loading. RESULTS: There was no change of tibiotarsal joint angle between extended digits and flexed digits under both unloaded and loaded conditions. Change in tibiotarsal joint angles did not differ among any of the immobilization techniques tested here (mean change 1.36°, range 0-5). The main contributor to variance in angle explained by the final model was associated with the random effect for limb. CONCLUSION: Changes in tibiotarsal joint angles during single static loading in canine cadaveric limbs for the 6 immobilization techniques were minimal. CLINICAL SIGNIFICANCE: The 6 techniques appear equally effective at limiting tibiotarsal joint flexion during single axial loading of 200 N. Cyclic mechanical testing of these techniques is recommended to support our findings and validate their clinical application.

Precision-guaranteed quantum tomography.

Quantum state tomography is currently the standard tool for verifying that a state prepared in the lab is close to an ideal target state, but up to now there have been no rigorous methods for evaluating the precision of the state preparation in tomographic experiments. We propose a new estimator for quantum state tomography, and prove that the (always physical) estimates will be close to the true prepared state with a high probability. We derive an explicit formula for evaluating how high the probability is for an arbitrary finite-dimensional system and explicitly give the one- and two-qubit cases as examples. This formula applies for any informationally complete sets of measurements, arbitrary finite number of data sets, and general loss functions including the infidelity, the Hilbert-Schmidt, and the trace distances. Using the formula, we can evaluate not only the difference between the estimated and prepared states, but also the difference between the prepared and target states. This is the first result directly applicable to the problem of evaluating the precision of estimation and preparation in quantum tomographic experiments.